Console Settings on 4ipnet WHG & HSG Series
Views - 2682  |  5 people found this helpful KBA-395

4ipnet - Wireless Hotspot Gateway  

Console Interface




Via this port to enter the console interface for the administrator to handle the problems and situations occurred during operation.

1.  In order to connect to the console port of WHG, a console, modem cable and a terminal simulation program, such as the Hyper Terminal or Putty are needed.
2.  If a Hyper Terminal is used, please set the parameters as 9600, 8, None, 1, None.







    Published on: 3/16/2016 9:27:59 AM   |  Last updated: 12/30/2016 3:22:29 PM  

Similar Articles

Share this article



Winco (Pacific) Limited      Phone: 2803-0036   Email: