How to Enable LACP on a SANLink2 10Gb Base-T on Windows
Views - 1741  |  1 people found this helpful KBA-500

Promise - SANLink  

I. Create LACP with Default MTU 1500 - Windows

1. Make sure to identify your 10 Gb Network Ports from the SANLink2
2. Go to Change adapter settings

http://kb.promise.com/content/uploads/8424a8f7-ef0d-4197-a135-a5b6009195e8/44c7d94e-a441-49c5-b9e8-a69e014f52f6_screen-shot-2016-10-13-at-4.44.52-am.jpg?width=690&upscale=false

http://kb.promise.com/content/uploads/8424a8f7-ef0d-4197-a135-a5b6009195e8/1de4c925-05db-44be-a3b8-a69e0150f1e6_screen-shot-2016-10-13-at-4.25.36-pm.jpg?width=690&upscale=false

3. You can also verify the connected devices by going to My Computer > Properties > Device Manager

http://kb.promise.com/content/uploads/8424a8f7-ef0d-4197-a135-a5b6009195e8/4866890e-d99f-4897-9374-a69e01513569_screen-shot-2016-10-13-at-4.47.26-am.jpg?width=690&upscale=false 

4. Locate Intel(R) Ethernet Controller X540-AT2
5. Right Click on Intel(R) Ethernet Controller X540-AT2 and select Properties

http://kb.promise.com/content/uploads/8424a8f7-ef0d-4197-a135-a5b6009195e8/18a72aad-247c-49cd-afaa-a69e0151f976_screen-shot-2016-10-13-at-4.29.44-pm.jpg?width=690&upscale=false

6. Navigate to the Teaming Tab

http://kb.promise.com/content/uploads/8424a8f7-ef0d-4197-a135-a5b6009195e8/be7e0aae-3382-4b19-a25a-a69e01523da7_screen-shot-2016-10-13-at-4.50.40-am.jpg?width=690&upscale=false

7. Select the checkbox, "Team this adapter with other adapters" and click on New Team

http://kb.promise.com/content/uploads/8424a8f7-ef0d-4197-a135-a5b6009195e8/8bb3cc2a-74a6-4ac6-a73a-a69e015307d7_screen-shot-2016-10-13-at-4.33.08-pm.jpg?width=690&upscale=false

8. Specify a name for the team: LACP_Example

http://kb.promise.com/content/uploads/8424a8f7-ef0d-4197-a135-a5b6009195e8/fb053676-7173-42a8-ad5d-a69e015349b9_screen-shot-2016-10-13-at-4.52.18-am.jpg?width=690&upscale=false

9. Click Next, and select both Intel(R) Ethernet Controller X540-AT2 and #2

http://kb.promise.com/content/uploads/8424a8f7-ef0d-4197-a135-a5b6009195e8/5f6793e8-2aca-4646-8e5f-a69e015399f6_screen-shot-2016-10-13-at-4.53.03-am.jpg?width=690&upscale=false

10. Select a team type: IEEE 802.3ad Dynamic Link Aggregation. (There are other options to choose from, you may select the team type that best suits yours needs)

http://kb.promise.com/content/uploads/8424a8f7-ef0d-4197-a135-a5b6009195e8/eb8a9089-f5f5-42d5-9963-a69e0153db4c_screen-shot-2016-10-13-at-4.55.59-am.jpg?width=690&upscale=false

11. Select a profile to apply to the team: Standard Server

http://kb.promise.com/content/uploads/8424a8f7-ef0d-4197-a135-a5b6009195e8/5fc2cb0d-72d2-4c5a-ad99-a69e01541c23_screen-shot-2016-10-13-at-4.56.55-am.jpg?width=690&upscale=false

12. Click Finish and allow it to the configure the team.